ADL200/C Single Phase Energy Meter for IOT Platform Electricity Consumption Monitoring
Single Phase Energy Meter
Multi tariff Function, RS485(Modbus-RTU) , 3 months historical energy data frozen storage, Active energy pulse output, etc.
ADL200 single phase electric meter is designed for single phase active energy measurement on low voltage system, in the same time it can measure the electrical parameters like voltage, current, power and so on. There is also RS485 can be chosen. This electricity meter has advantages of smaller volume, high precision, good EMC, easily installing etc, All meters meet the related technical requirements of electricity meter in the IEC62053-21、IEC62053-22 standards.
● Communication: RS485(Modbus-RTU), Infrared communication
● Rated voltage: AC220V, 230V
● Rated current: 3×10(80)A, measure 0.01A-80A
● Measurement: Active kWh (positive and negative), reactive power, U, I, P, Q, S, PF, F, etc.
● 1 phase 2 lines
● Standard&Certificate: MID, CE, IEC
● Multi-tariff: Adapt 4 time zones, 2 time interval lists, 14 time interval by day and 4 tariff rates(optional)
● Data Record: 3 months historical energy data frozen storage(optional)
● Pulse output: Active energy pulse output
● Key programming: 3 keys to set parameters, such as code, address, baud rate, multi-tariff and communication protocol
● Accuracy: 1.0
● Display: 8 digits display U, I, P, Q, PF, kWh and other energy consumption,
● Frequency: 50Hzl)
● Mounted: DIN 35mm
● Pulse constant: 1000imp/kWh
● Relative humidity: ≤95%(No condensation)
● Clock accuracy: ≤0.5s/d
● Starting current: 0.01A
3 phase 4 lines connect via CT
3 phase 4 lines connect via CT
Q: Could ADL200 be used in IoT Energy Monitoring System for factory or building?
A: ADL200 has standard RS485 interface and MODBUS-RTU communication protocol which allow it to be integrate with our IoT Energy Monitor Solution that can enable our users to remotely check all the data collect by energy meters like ADL200 on their mobile phone or PC. For more information, please Contact us or check in IoT Energy Monitoring Solution Introduction.
Q: Why is the reading on ADL200 different from actual value?
A: Check if the wiring was correct according to the wiring diagram of ADL200. The installation direction need to be according to the actual current direction.
Q: What is Multi-rate/tariff function? How does it work?
A: First,multi-rate/tariff function was designed to be used for billing system. Second, the electricity price of different time duration in a day is different in some country.
Energy meter with this function can measure the kwh data and assign them to several time duration in a day and put a label of spike/peak/flat/valley kwh on them respectively. And if such energy meter was connected to the billing system by using a IoT gateway, it can send the kwh data of different time duration which was with the label of spike/peak/flat/valley kwh to the billing system for calculating the electricity bill of different time duration in a day.
For example, the electricity price of spike kwh is 5 USD/1 kwh, and time duration of from 9:00 am to 11:30 am was labeled as spike kwh.
Then, if energy meter record 3 kwh used in total during 9:00 am to 11:30 am, it will send the data of 3 kwh with the label of spike kwh to the billing system, and the system calculate the electricity cost of 3x5=15USD in total from 9:00 am to 11:30 am.
Other Question? Please contact us and we will get back to you as soon as possible.
IOT Platform
All electricity data can be transmitted to the IOT platform
Prepayment management
Electricity data analysis
Alarming
Issue report
ADL200/C Single Phase Meter
RS485(Modbus-RTU)
Multi-tariff
3 months historical energy data frozen storage
Measurement: Active kWh (positive and negative), Reactive kWh (positive and negative), A, B, C phase positive active kWh, U, I, P, Q, S, PF, F, etc.
ADW200 Series
Multi-channel Energy Meter
5A, 100A, 400A, 600A
Measure 4 channels of 3 phase circuits
ADL3000-E/C(DTSD1352-C) 3 Phase Meter
RS485(Modbus-RTU)
2 channels of RS485
Multi-tariff
1DI/1DO
3 channels of temperature measurement
2-31st harmonic
Frozen data on last 48 months, last 90 days
ADW210 Series
Multi-channel Energy Meter
Input current: 5A, 100A, 400A, 600A
Measure 4 channels of 3 phase circuits
AMC72 3 Phase Energy Meter
Input current: 5A, or 1A
RS485(Modbus-RTU)
2DI/2DO
THDi, THDu
SOE:event record
Measurement: Active kWh (positive and negative),
reactive power, U, I, P, Q, S, PF, F, etc.
ADF400L Series
Multi-channel Energy Meter
Measure 12 channels of 3 phase circuits,
or 36 channels of 36 single phase circuits
Input current: 3*1(6)A, 80A
APM830 Three Phase Energy Meter
Measurement: total electrical measurement,
Pulse output of energy
Demand data, Event log
Extreme value statistics
Power quality analysis
RS485(Modbus-RTU), 1 Profibus-DP
10DI+4DO, 8AI+4AO
Multi tariff, TF card storage
1 Ethernet, support Modbus-TCP, http, SMTP, DHCP protocol
|
Specification
|
1 phase 2 lines
|
|
|
Voltage
|
Reference voltage
|
AC220V, 230V
|
|
Consumption
|
<10VA
|
|
|
Reference frequency
|
50Hz
|
|
|
Current
|
Input current
|
10(80)A, measure 0.01A-80A
|
|
Starting current
|
4‰Ib
|
|
|
Consumption
|
＜4VA
|
|
|
Accuracy of measuring
|
1.0
|
|
|
Range of measuring
|
000000.00~99999999kWh
|
|
|
Clock accuracy
|
≤0.5s/d
|
|
|
Width of active pulse
|
80±20ms
|
|
|
Pulse constant
|
1000imp/kWh
|
|
|
Interface and communication
|
RS485(Modbus-RTU)
|
|
|
RS485 connection mode
|
Shielded twisted pair conductors
|
|
|
Dimension
|
90*36*65mm
|
|
|
Strong current terminal Torque
|
＜1.8Nm
|
|
|
Relative temperature
|
-25℃~+55℃
|
|
|
Storage Temperature
|
-40℃~70℃
|
|
|
Relative humidity
|
≤95℅(No condensation)
|
|
|
Altitude
|
＜2000m
|
|
1. who are we?
We are a top manufacturer with over 1500 employees, over 300 R&D engineers in China, with CE, ROHS, IEC, EAC, MID, UL, FCC Certificates, etc.
Our Products: AC/DC electricity meters, current transformers, hall sensors, transducers, gateways, Motor protectors, wireless temperature monitoring, residual current relays, medical IT, IOT platform, other energy management systems, etc.
As a top-level provider of electrical solution service, we can help you save energy, reduce cost, improve energy efficiency and safety, realize intelligent, visual and fine management of energy, and provide data services for energy management.
2. What is your website?
www.acrel.sg
3. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
4.what can you buy from us?
AC/DC Energy Meter, Hall Effect Sensor, Current Transformer, Current Transducer, Motor Protectors, Wireless Temperature Monitoring, Residual Current Relay, IOT Platform, etc.
5. why should you buy from us not from other suppliers?
147 computer software copyrights, 2 million meters, 1.5 million transformers, more than 100 design patents, 70 utility model patents.
6. what services can we provide?
Accepted Delivery Terms: FOB, CFR, CIF, EXW, DDU, Express Delivery, etc.
Accepted Payment Currency: USD, EUR, RMB, etc.
Accepted Payment Type: T/T, L/C, etc.
Language Spoken:English, Spanish, Chinese, etc.
-
4G Remote Wireless Smart Gateway
-
ADW210 Series Multi-Loop Power Meter
-
ADW200 Series Multi Channel Energy Meter
-
ADW350WD Multi-Circuits DC Energy Meter
-
AKH-0.66/I series current transformer
-
AKH-0.66/K series split core current transformer
-
AWT100 wireless communication terminal
-
AHLC-LTA DC leakage current sensor
