-
DC leakage current sensor
Rated current input：10mA-2A
Rated output: 5V
Power supply: ±15V
-
DC voltage hall sensor
Rated current input：DC0-(50-4000)A
Rated output: 5V/4-20mA/50mA
Power supply: ±15V / 12V / 24V
-
Closed Hall Current Sensor
Rated current input：0-(100-2000)A
Rated output: 5V/4V/4-20mA
Aperture: 20mm/40mm/60mm/etc
Power supply: ±15V / 12V / 24V
-
Closed Loop Hall Current Sensor
Rated current input：0-(100-2000)A
Rated output: 50mA/100mA/200mA/400mA
Aperture: 20mm/40mm/60mm/etc
Power supply: ±15V / 12V / 24V
-
Open Hall Current Sensor Measuring AC/DC0-5000A
Rated current input：0-(50-5000)A
Rated output: 5v / 4v / 4-20mA
Aperture: 20mm/40mm/55mm/etc
Power supply: ±15V / 12V / 24V
-
Open Hall Current Sensor
Hall current sensors are mainly used to isolate and convert Ac,DC,pulse and other complex signals .After signals are convertedaccording to the Hall Effect
Theory,the can be directly acquired by AD,DSP,PLC, secondary instruments and other devices. -
AKH-0.66/Z Series integrated Current Transformer
1. Combined current transformer is also called the three-phase current transformer.
2. As current signal acquisition device, it is generally matched with multi-loop current monitoring device (AMC16), PZ300, moulded case circuit breaker and other products.
3. It can save installation space, reduc the cumbersome wiring, be convenient to use and effectively reduce the cost. -
Frepuency Transducer BD-F
BD series isolate and convert electrical parameters (e.g. current, voltage, frequency, power and power factor) in the power grid into DC analog signal or digital signal.The product complies with GB/T13850-1998 and IEC-688.
-
3 Phase Voltage Transducer BD-3V3 Measuring 0-500V
BD series isolate and convert electrical parameters (e.g. current, voltage, frequency, power and power factor) in the power grid into DC analog signal or digital signal.The product complies with GB/T13850-1998 and IEC-688.
-
3 Phase Power Transducer BD-3(4)P
BD series isolate and convert electrical parameters (e.g. current, voltage, frequency, power and power factor) in the power grid into DC analog signal or digital signal.The product complies with GB/T13850-1998 and IEC-688.
-
3 Phase Current Transducer BD-3I3 Measuring 0-5A
BD series isolate and convert electrical parameters (e.g. current, voltage, frequency, power and power factor) in the power grid into DC analog signal or digital signal.The product complies with GB/T13850-1998 and IEC-688.
-
DC Current Transducer BD-DI Measuring 0-20mA
BD series isolate and convert electrical parameters (e.g. current, voltage, frequency, power and power factor) in the power grid into DC analog signal or digital signal.The product complies with GB/T13850-1998 and IEC-688.
